模擬量定位氣缸傳感器德國SICK施克產品特點

測量距離從107mm到1007mm，36mm長度遞增，共26種長度可選
傳感器同時提供模擬量4~20mA/0~10V和IO-Link接口輸出
搭配安裝支架適合T型槽氣缸，圓柱缸以及拉桿氣缸
線性度達0.5 mm，采樣周期1.15 ms
分辨率達0.03 %，重復精度達 0.06 %
4色LED狀態指示燈和電容式設置按鈕
堅固的鋁合金外殼，IP 67 防護等，防絞合電纜設計Precisely defined, repeatable output signals are an absoluy basic requirement for precision processes. In addition, the MPA positioning sensor provides these signal with a very high sampling rate of 1.15 ms.
Since the MPA positioning sensor is only slightly longer than its measurement range, it provides high flexibility for a wide variety of applications. The minimum blind zones on the cable outlet and head allow problem-free installation even in extremely restricted areas. 
The MPA positioning sensor provides a current output between 4 and 20 mA, a voltage output between 0 and 10 V, and an IOLink interface – all in once device. This means the highest level of flexibility in selecting the output signal and ease of matching to the higher-level controller. 
IO-Link is a global universal The MPA has a capacitative An extensive range of mounting accessories are available for the versatile MPA positioning sensor. Customized adapters are available for mounting on roundbody cylinders, tie rod cylinders, cylinders with T-slots, and other cylinder types. Mounting brackets and external magnets are provided for other linear position measurement applications. In all cases, the sensor can be easily and securely mounted and equipped with matching connection technology.

模擬量定位氣缸傳感器德國SICK施克產品特點
A rugged, chemically resistant aluminum housing and cable kink protection protect the MPA positioning sensor from  mechanical stresses. The aluminum housing has a capacitative, seamless teach pad to provide a high level of impermeability and moisture protection, and is the basis for its high IP 67  enclosure rating. And last but not least, the MPA positioning  sensor is non-contact and is thus wear-free, ensuring an  extremely long service life. teach pad to allow quick commissioning and flexible adjustment to modified tasks. Gentle finger pressure is all that is needed for selecting an output current between 4 and 20 mA,  a voltage between 0 and 10V, or IO-Link, for optionally setting the measuring range, and for resetting to the factory settings. However, it is also safe from unintentional changes to the sensor settingscommunication standard for setting parameters and performing configuration for simple switching or analog sensors and actuators. IO-Link provides any automation system with easy access to compley integrated analog or digital sensor data.氣缸、液壓缸或電動缸推桿位置測量，如進給，抓取或測量等應用
壓裝機過程位置控制
通過帶磁目標實現線性定位與測量
通過漂浮磁實現液位測量多個測量范圍靈活適應各種場合的定位和測量應用
一體集成多種輸出方式消除客戶備貨和選型的困擾
豐富的附件適合各種不同類型的氣缸應用
小的盲區和分辨率大大提升定位和測量的精度和可重復性及其穩定性
*設計使傳感器壽命更長、運行穩定，減少維護成本和安裝調試維護時間
適用于各種苛刻環境的應用